JUMO PCA3000 PC Evaluation Software - Manual (Page 81)

81
10 Menu functions and toolbar
Zoom
backwards
(zoom out) The last zoomed display can be restored through this function. It is only
available if zooming has been carried out. As an alternative to the mouse,
Zoom backwards can also be executed from the PC keyboard (page down).
10.4 View
Toolbar Show/hide toolbar.
Status bar Show/hide status bar (at the lower end of the software window).
Coordinate bar Show/hide coordinate bar (at the lower end of the software window, above the
status bar).
10.5 Extras
Enable (unlock)
program
options If the software has been installed as a viewer (“read-only” mode), then some
functions, such as saving, are disabled. This function can be used to register
the software at a later stage and so change it to a full version.
Renew log-in /
alter password This function enables the logged-in user to log in freshly and use the options
that are also available with a fresh startup of the software.
v Chapter 11 “Options at program start”
Comment in
audit trail This function can be used to make a manual entry in the audit trail. The entries
can be visualized by means of the PC Audit Trail Manager software.
v Additional information about the PC Audit Trail Manager software (PCAT)
can be found in the Operating Manual B 70.9704.0.