JUMO PCA3000 PC Evaluation Software - Manual (Page 76)

10 Menu functions and toolbar
76
(alteration of the setting) of any device.
- Search procedure 1:
In the “Folder for target archives” path, all existing archives are searched
for a corresponding device and configuration ID, which will be determined.
The files found are made available for selection in the “Target archive” field
(click on
). The first archive that has been found will be automatically
entered in the “Target archive” field.
- Search procedure 2:
The search procedure corresponds to the first search procedure, with the
difference that only one archive with a corresponding device ID is searched
for. The second search procedure will only be started if no archive has been
found during the first one.
- If no corresponding archive was found during the two search procedures,
the “Target archive” remains empty and you can enter an archive name by
hand.
- An archive name that has been entered automatically can be manually
overwritten.
- If a target archive field remains empty, there will be an archive name query
during read-in.
- The “Folder for data source” and “Folder for target archive” settings will be
backed up after the read-in and automatically entered when the function is
called up next.
Save data This function saves measurement data from one archive to a separate file. This
file can be passed on, for example for examination purposes. The procedure
has already been described in Chapter 6.4 “Backing up data”.
Save data as This function saves measurement data from an archive into a separate file with
additional protection options. This file can be passed on for checking purpos-
es, for example. How this is done, has already been described in Chapter 6.4
“Backing up data”.
Print preview This function serves to check the print result.
Printer setup Here you can make alterations to the settings for your printer. When the
program is started, the Windows default printer will always be set as the active
printer.
Print This function starts the print job.
Default settings
Here you can make alterations to the default settings for the program. The
alterations will only take effect after a fresh start of the PCA3000 software.
General
In the “General” register you can select the language that the software has to
use at the next program start.