JUMO 706585 LOGOSCREEN fd Operating Instructions - Manual (Page 32)

4 Visualization
32
Memory
presentation This function starts the presentation of the data that are available in the history
memory.
v Chapter 5 "Memory Presentation (History)"
Numerical
measurement
display This function is used to switch the numerical measurement display (diagram
header) and binary traces on or off, as well as to activate the envelope display.
Channel
step-on This function activates the scaling display. Repeated activation steps through
the scaling for the channels within the group, and then blanks it out again.
Group
step-on Unlike “Group selection”, where any group can be selected, this function is
used to select the groups one after another.
4.3.2 Horizontal presentation
In the display, signals are continuously displayed on the screen running from
right to left.
The same functions as for the vertical display apply.
Programmable
alarm limits
Group number