JUMO 14597 safetyM TB/TW - Temperature Limiter and Temperature Monitor Data Sheet - Manual (Page 7)

2011-12-31/00506174
Data sheet 701160 JUMO GmbH & Co. KG • 36035 Fulda, Germany Seite 7/8
Connection diagram
Voltage
supply
as on nameplate AC
L1 External conductor
N Neutral conductor DC
L+
L-
Analog
inputs Thermocouple
Twin thermocouple
RTD temperature probe or KTY11-6 PTC in 2-wire circuit
Resistance thermometer in 3-wire circuit
Resistance thermometers 2 x Pt100 in
2-wire circuit for differential measurement
(lead compensation not possible)
0(4) ... 20 mA or 0(2) ... 10 V
Binary input for connection to floating contact
Binary output 24 V DC / 20 mA (short-circuit proof)
Relay output Relay with safety fuse for pole contact
Screw terminals
Setup interface
K1 operating state
KV warning alarm
Screw terminals
Setup interface
K1 operating state
KV warning alarm
A
If an RTD temperature probe in 2-wire circuit with longer
cable lengths
is connected, the lead resistance must be entered into the
setup program and transmitted to the device.
S
P
9 10 12
Ö
3,15AT