JUMO 909715 Terminal Heads Data Sheet - Manual

JUMO GmbH & Co. KG
Delivery address: Mackenrodtstraße 14
36039 Fulda, Germany
Postal address: 36035 Fulda, Germany
Phone: +49 661 6003-0
Fax: +49 661 6003-607
E-mail: [email protected]
Internet: www.jumo.net
JUMO Instrument Co. Ltd.
JUMO House
Temple Bank, Riverway
Harlow, Essex CM20 2DY, UK
Phone: +44 1279 635533
Fax:
+44 1279 635262
E-mail: [email protected]
Internet: www.jumo.co.uk
JUMO Process Control, Inc.
6733 Myers Road
East Syracuse, NY 13057, USA
Phone: 315-437-5866
1-800-554-5866
Fax: 315-437-5860
E-mail: [email protected]
Internet: www.jumousa.com
2013-09-18/00073422
Data Sheet 909715 Page 1/5
bik Terminal heads and blocks
• For thermocouples and RTD temperature probes
• Terminal heads in different materials
• Protection IP54 and IP65
• Versions for lead sealing
Terminal heads (pages 1 to 4)
DIN EN 50446 specifies the terminal head forms A and B, which differ in size and also slightly
in shape. The nominal diameter of the bore to take the protection tube is 22 mm or 32 mm for
Form A, and 15 mm or thread M24 × 1.5 for Form B.
Either aluminium or plastic is used according to the application. Terminal head form B as per DIN
is more widely used. The additional forms J, BBK, BUZ and BUZH are derived from the DIN form
to meet particular requirements. These forms are suitable for installing a 2-wire transmitter.
Terminal blocks (page 5)
Suitable terminal blocks with two, four or six connections are available for the different terminal
heads.
Note: please state part no. as per price sheet 909715 when ordering!
Terminal heads to DIN EN 50446, Form A
IP54 protection
Note: versions up to 200 °C on request
● available from stock Item 1
Diameter
D in mm Temperature
in °C Part no.
Terminal head Form A 22
aluminium die-casting
22.8 -40 to +100 00387685 ●
Terminal head Form A 32
32.5 -40 to +100 00387688 ●