JUMO 901190 Push-In Thermocouples with Bayonet Connection Data Sheet - Manual

2009-05-11/00314545
Data Sheet 90.1190 (90.1109) Page 1/4
JUMO GmbH & Co. KG
Delivery address: Mackenrodtstraße 14,
36039 Fulda, Germany
Postal address: 36035 Fulda, Germany
Phone: +49 661 6003-0
Fax: +49 661 6003-607
E-mail: [email protected]
Internet: www.jumo.net
JUMO Instrument Co. Ltd.
JUMO House
Temple Bank, Riverway
Harlow - Essex CM20 2DY, UK
Phone: +44 1279 63 55 33
Fax:
+44 1279 63 52 62
E-mail: [email protected]
Internet: www.jumo.co.uk
JUMO Process Control, Inc.
8 Technology Boulevard
Canastota, NY 13032, USA
Phone:
315-697-JUMO
1-800-554-JUMO
Fax: 315-697-5867
E-mail: [email protected]
Internet: www.jumo.us
Push-in thermocouples
with bayonet lock
■ for temperatures from 0 to 400°C
■ as single or twin thermocouple
■ good heat transfer through adjustable spring pressure
■ insulated assembly, or joined to protection tube
■ insertion and removal without tools
Push-in thermocouples with bayonet lock are preferred for measuring temperatures in sol-
ids, bearings and molding tools, for example in the plastics industry. The special form of
the measuring tips makes these temperature probes suitable for use in flat-bottom or
cone-shaped bores.
The rugged pressure spring, which also functions as a cable protector, is made from rust
and acid resistant stainless steel 1.4310 and ensures a steady pressure between the
measuring tip and the bottom of the hole. The fitting length can be altered by rotating the
bayonet lock. Bayonet locks and suitable sockets are available in the diameters 12, 14.5,
15 and 16mm.
The measuring insert is normally fitted with thermocouples to EN 60 584 or DIN 43 710.
Versions with two thermocouples are also available.
Technical data
Connection available with cable ends as: bare wires, with ferrules, receptacles or multipole connector
(e.g. connectors that are free from thermal emf)
Compensating cable silicone, ambient temperature -50 to +180°C
PTFE, ambient temperature -190 to +260°C
metal braiding, ambient temperature -20 to +350°C
Process connection bayonet lock, nickel-plated brass, 12mm, 14.5mm, 15mm or 16mm dia.
Protection tube stainless steel 1.4571, 6mm and 8mm dia.
Measuring insert insulated assembly:
1x Fe-Con J, EN 60 584, Cl. 2, operating temperature 0 to 400°C
1x Fe-Con L, DIN 43 710, Cl. 2, operating temperature 0 to 400°C
1x NiCr-Ni K, EN 60 584, Cl. 2, operating temperture 0 to 400°C
2x Fe-Con L, DIN 43 710, Cl. 2, operating temperature 0 to 400°C
2x NiCr-Ni K, EN 60 584, Cl. 2, operating temperature 0 to 400°C
Accessories bayonet sockets, Data Sheet 90.9725