JUMO 901050 Screw-In Thermocouples with Compensating Cable Data Sheet - Manual

2009-05-11/00314538
Data Sheet 90.1050 (90.1005) Page 1/3
JUMO GmbH & Co. KG
Delivery address: Mackenrodtstraße 14,
36039 Fulda, Germany
Postal address: 36035 Fulda, Germany
Phone: +49 661 6003-0
Fax: +49 661 6003-607
E-mail: [email protected]
Internet: www.jumo.net
JUMO Instrument Co. Ltd.
JUMO House
Temple Bank, Riverway
Harlow - Essex CM20 2DY, UK
Phone: +44 1279 63 55 33
Fax:
+44 1279 63 52 62
E-mail: [email protected]
Internet: www.jumo.co.uk
JUMO Process Control, Inc.
8 Technology Boulevard
Canastota, NY 13032, USA
Phone:
315-697-JUMO
1-800-554-JUMO
Fax: 315-697-5867
E-mail: [email protected]
Internet: www.jumo.us
Screw-in thermocouples
with compensating cable
■ for temperatures from -200 to +600°C
■ available with different thermocouples
■ as single or twin thermocouple
■ compensating cable in silicone or with metal braiding
Screw-in thermocouples are preferred for measuring temperatures in liquids and gases. An
important selection criterion is their reliable sealing against both negative and positive
pressures. Applications include heating installations, ovens, furnaces and plant engineering.
Depending on the version, the compensating cables are suitable for use in dry and humid areas
within a temperature range from -20 to +350°C. The connection of the cable to the protection
tube incorporates strain relief and can be provided with a cable protector (option).
Protection tubes in stainles steel protect the measuring insert from chemical influences and
mechanical damage.
The measuring insert is fitted with thermocouples to EN 60 584 and DIN 43 710. Versions with
two thermocouples are also available.
Technical data
Connection available with cable ends as: bare wires, ferrules, with receptacles or multipole connector
Compensating cable silicone, ambient temperature -50 to +180°C
metal braiding, ambient temperature -20 to +350°C
Process connection thread, stainless steel 1.4571
Protection tube stainless steel 1.4571, 6mm and 8mm dia.
Measuring insert insulated assembly:
1 x Fe-Con L, DIN 43 710, Cl. 2, operating temperature -200 to +600°C
1 x NiCr-Ni K, EN 60 584, Cl. 2, operating temperature -200 to +600°C
2 x Fe-Con L, DIN 43 710, Cl. 2, operating temperature -200 to +600°C
2 x NiCr-Ni K, EN 60 584, Cl. 2, operating temperature -200 to +600°C
Accessories pockets, Data Sheet 90.9721