JUMO 902810 RTD Temperature Probe for the Food and Pharmaceutical Industry Data Sheet - Manual

2010-04-26/00351582
Data Sheet 90.2810 Page 1/4
JUMO GmbH & Co. KG
Delivery address: Mackenrodtstraße 14,
36039 Fulda, Germany
Postal address: 36035 Fulda, Germany
Phone: +49 661 6003-0
Fax: +49 661 6003-607
E-mail: [email protected]
Internet: www.jumo.net
JUMO Instrument Co. Ltd.
JUMO House
Temple Bank, Riverway
Harlow - Essex CM20 2DY, UK
Phone: +44 1279 63 55 33
Fax:
+44 1279 63 52 62
E-mail: [email protected]
Internet: www.jumo.co.uk
JUMO Process Control, Inc.
8 Technology Boulevard
Canastota, NY 13032, USA
Phone:
315-697-JUMO
1-800-554-JUMO
Fax: 315-697-5867
E-mail: [email protected]
Internet: www.jumo.us
RTD temperature probes for the
food and pharmaceutical industries
■ for temperatures from -50 to +250 °C
■ EHEDG certification
■ stainless steel protection tubes
■ with optional 2-wire transmitter
■ CIP-compliant installation
The RTD temperature probes can optionally be provided with terminal heads in stainless steel,
aluminium die-casting, or plastic.
To suit the specific needs of the different sectors of the food and pharmaceutical industries, a
wide variety of process connections can be supplied: from G 1/2 (1/2" pipe) screw fittings with
CIP-compliant sealing cone, through taper nipples with ring nut (milke pipe fitting), and
clamping nipples, to sliding ball weld-in sockets, weld-in sockets, Varivent connections, and
ball weld-in pockets. The protection tubes are made from stainless steel.
The RTD temperature probes for the food and pharmaceuticual industries are suitable for the
temperature range from -50 to +250 °C.
Pt100 single and twin temperature sensors to EN 60751, Class A, in 3-wire circuit ensure the
highest degree of accuracy.
For longer transmission distances, analog or programmable 2-wire transmitters are optionally
available.
Technical data
Terminal head stainless steel 1.4571, M 16x1.5; IP67, ambient temperature -20 to +100 °C
Form B DIN 43729, aluminium die-casting, M 20x1.5; IP54, ambient temperature -40 to +100 °C
Form BUZ, aluminium die-casting, M 20x1.5; IP65, ambient temperature -40 to +100 °C
Form BUZH, aluminium die-casting, M 20x1.5; IP65, ambient temperature -40 to +100 °C
Form BBKS, plastic (PA 6), M 20x1.5; IP54, ambient temperature -30 to +130 °C
Caution: reduced ambient temperature when using transmitters;
data sheet 70.7010/70.7030
Extension tube stainless steel, approx. 70 mm long, 9 mm dia.
Process connection screw fitting with CIP-compliant sealing cone, stainless steel 316 L, with EHEDG certification
clamping nipple to DIN 32676, stainless steel 316 L
clamping nipple with ring nut (milk pipe fitting) to DIN 11851, stainless steel 316 L
ball weld-in socket, stainless steel 316 L, clamping ring in PTFE
CIP-compliant weld-in socket, stainless steel 316 L, seal in PTFE
Varivent connection, stainless steel 316 L, with EHEDG certification
ball weld-in pocket, stainless steel 316 Ti
JUMO PEKA process connection adapter, stainless steel 316 L, with EHEDG certification
Sheath stainless steel 316 L, 6 mm dia.
stainless steel 316 Ti, on request
Measuring insert Pt100 temperature sensor to EN 60751, Class A, 3-wire circuit
Response times t
0.9
= 10 sec, in water 0.4 m/sec, 6 mm dia.
Transmitter analog transmitter, output 4 to 20 mA, data sheet 70.7030
analog transmitter, output 0 to 10 V, data sheet 70.7030
programmable transmitter, output 4 to 20mA/20 to 4 mA, data sheet 70.7010
Approval/approval marks