JUMO 902130 Push-In RTD Temperature Probe with Form J Terminal Head Data Sheet - Manual

2009-10-20/00389506
Data Sheet 90.2130 (90.2103) Page 1/3
JUMO GmbH & Co. KG
Delivery address:Mackenrodtstraße 14,
36039 Fulda, Germany
Postal address: 36035 Fulda, Germany
Phone:
+49 661 6003-0
Fax: +49 661 6003-607
e-mail: [email protected]
Internet: www.jumo.net
JUMO Instrument Co. Ltd.
JUMO House
Temple Bank, Riverway
Harlow, Essex CM 20 2TT, UK
Phone: +44 1279 635533
Fax:
+44 1279 635262
e-mail: [email protected]
Internet: www.jumo.co.uk
JUMO Process Control, Inc.
8 Technology Boulevard
Canastota, NY 13032, USA
Phone:
315-697-JUMO
1-800-554-JUMO
Fax: 315-697-5867
e-mail: [email protected]
Internet: www.jumo.us
Push-in RTD temperature probe
with terminal head form J
■ for temperatures from -50 ... +400°C
■ As single or double RTD temperature probes
■ Available with transmitter
■ Protection class IP65
Push-in RTD temperature probes are preferentially used for measuring temperatures in liquids
and gases. A decisive selection criterion is the reliable sealing feature of this installation type
with vacuum and with overpressure. The application areas are, among others, in the air
conditioning technology and refrigeration engineering as well as the HVAC, kiln and apparatus
engineering sector.
The measuring insert is normally fitted with a Pt 100 temperature sensor according to DIN EN
60 751, Class B in 2-wire circuit; versions with Pt 500 or Pt 1000 temperature sensors can also
be supplied, as well as 3- and 4-wire circuit connections. A transmitter can be optionally
integrated into the connection head.
Technical Data
Terminal head Form J, die-cast aluminum, M 16x1.5; IP65, ambient temperature -40 ... +100°C
Caution: reduced ambient temperature range when using transmitters,
Data Sheet 70.7030
Process connection Metal flange Ø 6mm, Ø 8mm, galvanized steel
Thermowell screw-connection Ø 6mm, Ø 8mm, stainless steel
Thermowell screw-connection, spring loaded Ø 8mm, spring deflection 12mm, stainless steel
Thermowell Stainless steel 1.4571, Ø 6mm and Ø 8mm
Measuring insert Pt 100 temperature sensor according to DIN EN 60 751, Class B, two-wire circuit
Transmitter Analog transmitter, 4 ... 20mA output, Data sheet 70.7030
Accessories Thermowell, Data Sheet 90.2440 and 90.9721