JUMO 902153 Push-In RTD Temperature Probe with Connecting Cable for Solar Thermal Systems Data Sheet - Manual

Data sheet 902153 Page 1/3
JUMO GmbH & Co. KG
Delivery address: Mackenrodtstraße 14
36039 Fulda, Germany
Postal address: 36035 Fulda, Germany
Phone: +49 661 6003-0
Fax: +49 661 6003-607
E-mail: [email protected]
Internet: www.jumo.net
JUMO Instrument Co. Ltd.
JUMO House
Temple Bank, Riverway
Harlow, Essex CM20 2DY, UK
Phone: +44 1279 635533
Fax:
+44 1279 635262
E-mail: [email protected]
Internet: www.jumo.co.uk
JUMO Process Control, Inc.
6733 Myers Road
East Syracuse, NY 13057, USA
Phone: 315-437-5866
1-800-554-5866
Fax: 315-437-5860
E-mail: [email protected]
Internet: www.jumousa.com
Push-in RTD temperature probe
with connection cable
for the solar heating system
 temperature range from -50 to +260 °C
 for collector and accumulator temperature measurement
 long-term stability
 cost-effective design for solar heating systems
 connection cable made of PVC, PUR, silicone or PTFE
The push-in RTD temperature probes have been developed based on the requirement of tem-
perature measurement in solar thermal systems to be used in collectors and accumulators. Par-
ticular emphasis must be placed on the excellent features such as sealing, temperature and
long-term stability, which are basic prerequisites to ensure reliable system operation even after
many years. A design specifically adapted to the market requirements allows a cost-effective
production.
A Pt1000 temperature probe is used in almost all solar thermal systems to minimize the influ-
ence of the lead resistance due to the 2-wire circuit technology. Different nominal values of the
platinum temperature probe or different temperature probes are optionally available.
Technical Data
Connection Stripped wire ends, tin-plated connection wires, with ferrules
or contacts 6.3 mm flat available
Cable PVC, ambient temperature -5 to +105 °C
PUR, ambient temperature -5 to +105 °C
Silicone, ambient temperature -50 to +180 °C
PTFE, ambient temperature -190 to +260 °C
Sheath Stainless steel or brass
Measuring insert Pt1000 temperature probe, DIN EN 60751, cl. B, 2-wire circuit
different nominal values or temperature probes on request
Response times t
0.5
= 4 s and t
0.9
= 10 s with Ø 5 mm
t
0.5
= 6 s and t
0.9
= 14 s with Ø 6 mm
in water 0.4 m/s
Accessories Sheath, Data Sheet 909710 and 902440
2014-03-20/00525720