JUMO 902090 Screw-In Melt RTD Temperature Probe Data Sheet - Manual

Page 1/5
JUMO GmbH & Co. KG
Delivery address: Mackenrodtstraße 14,
36039 Fulda, Germany
Postal address: 36035 Fulda, Germany
Phone: +49 661 6003-0
Fax: +49 661 6003-607
E-mail: [email protected]
Internet: www.jumo.net
JUMO Instrument Co. Ltd.
JUMO House
Temple Bank, Riverway
Harlow - Essex CM20 2DY, UK
Phone: +44 1279 63 55 33
Fax:
+44 1279 63 52 62
E-mail: [email protected]
Internet: www.jumo.co.uk
JUMO Process Control, Inc.
8 Technology Boulevard
Canastota, NY 13032, USA
Phone:
315-697-JUMO
1-800-554-JUMO
Fax: 315-697-5867
E-mail: [email protected]
Internet: www.jumo.us
2009-08-24/00474326
Screw-in
melt RTD temperature probes
k Temperature range from -50 to +400°C
k Various probe tips available
k Stainless steel thermowell and probe tip
k Ceramic insulated probe tip
k In 2-wire, 3-wire or 4-wire-circuit
k For application in the plastics processing industry
Screw-in melt RTD temperature probes are preferably used for temperature measurement to
record the melt temperature in the plastics processing industry.
Blade shaped or plane probe tips ensure optimum temperature recording depending on the re-
quirements. Depending on their version, the connection lines are suitable for a temperature
range of -50 to +400°C.
The measuring insert is equipped with a Pt 100 temperature probe as per DIN EN 60 751, class
B in 2-wire-circuit. Connection is also available in 3-wire or 4-wire-circuit as an option.
Technical Data
Connection Stripped wire ends, with ferrules, also available with multi-pole connector,
Connector, 2/4-pin, IP50
Cable PTFE, ambient temperature -190 to +260°C
PTFE metal braiding, ambient temperature -50 to +260°C
metal braiding, ambient temperature -50 to +400°C
Process connection thread, stainless steel 1.4571
Thermowell stainless steel 1.4571
Measuring insert Pt-100 temperature sensor, DIN EN 60 751, Class B, two-wire circuit
Accessories Mating connector 2/4-pin, size II, data sheet 90.9726, Pos. 5
Data sheet 90.2090