KV2 Audio EX12 - Manual (Page 6)

EX12 USER’S GUIDE P. 6
AC Cable Color Coding
If the colors referred to in the diagram don’t correspond
to the terminals in your plug, use the following guide-
lines: Connect the blue wire to the terminal marked with
a N or colored black. Connect the brown wire to the
terminal marked with an L or colored red. Connect the
green and yellow wire to the terminal marked with an E
or colored green or green and yellow.
CAUTION:
The EX12 requires a ground
connection. Always use a grounded outlet and
plug.
IIMPORTANT SAFETY INSTRUCTIONS
1 Read all product instructions.
2. Keep printed instructions, do not throw away.
3. Respect and review all warnings.
4. Follow all instructions.
5. Do not use this loudspeaker near water, in unpro-
tected out door areas or in rain or wet conditions.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
8. Install in accordance with KV2 Audio recommended
installation instructions.
9. Do not install near any heat sources such as heat
radiators, heat registers, stoves, or other apparatus
that produce heat.
10. Do not defeat the safety purpose of the grounding
type plug. A grounding type plug has two blades and
a third grounding connector. The third connector is
provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement
of the obsolete outlet.
11. Protect the power cord from being walked on or
pinched, particularly at plugs, convenience receptacles,
and the point where they exit from the loudspeaker.
The AC mains plug or appliance coupler shall remain
readily accessible for operation.
12. Only use accessories specified by KV2 Audio.
13. Install the product only with rigging specified by
KV2 Audio, or sold with the loudspeaker.
CAUTION: Rigging should only be done
by experienced professionals.
14. Unplug this loudspeaker during lightning storms or
when unused for long periods of time.
15. Refer all servicing to qualified service personnel.
Servicing is required when the loudspeaker has been
damaged in any way, such as when the power-supply
cord or plug has been damaged; liquid has been spilled
or objects have fallen into the loudspeaker; rain or
moisture has entered the loudspeaker; the loudspeaker
has been dropped; or when for undetermined reasons
the loudspeaker does not operate normally.
SAFETY SUMMARY
To reduce the risk of electric shock, disconnect the
loudspeaker from the AC mains before installing audio
cable. Reconnect the power cord only after making all
signal connections. Connect the loudspeaker to a two-
pole, three-wire grounding mains receptacle. The re-
ceptacle must be connected to a fuse or circuit breaker.
Connection to any other type of receptacle poses a
shock hazard and may violate local electrical codes.
Do not allow water or any foreign object to get inside
the loudspeaker. Do not put objects containing liquid
on or near the unit. To reduce the risk of overheating
the loudspeaker, avoid exposing it to direct sunlight. Do
not install the unit near heat-emitting appliances, such
as a room heater or stove. This loudspeaker contains
potentially hazardous voltages. Do not attempt to dis-
assemble the unit. The unit contains no user service-
able parts, repairs should be performed only by factory
trained service personnel.
CHAPTER 1: AC POWER REQUIREMENTS
GREEN / YELLOW
Power cable color coding