Labnet MultiGene Mini Personal Thermal Cycler - Manual (Page 15)

13
“Tube mode” controls the cooling & heating rate of the block, inconsideration
of the sample temperature changing at a slower rate. In tube mode, there is an
overshoot after reaching the set temperature, which allows the sample to reach
the set temperature faster, and will help the stay at the set temperature for a
longer period. (Please refer to the following figure: relation between block
temperature and reagent temperature.)
1.2.4 “Key Sound” and “Run End Sound” stand for an audible key tone when
pressing a key and an audible alert at the end of a run, respectively.
Block
Reagent