Labnet MultiGene Mini Personal Thermal Cycler - Manual (Page 20)

18
APPENDIX 2 Parameter Values
Item Parameter Scale Range Note
1 Temp(ºC) Temp. Control point 4.0~99.0
--:--
（
set the value before
“：”through “Function”
key.）
The time of Temp. control is
infinite, meanwhile, the hotlid
turned off.
2 Time
Time of Temp.
Control（mm:ss）
00：00~59：59
0.1 ~5.0
3 Ramp(C/S)
Ramping Rate
（ ºC/Second） #.# Maximum of Ramping Rate
4 +Temp
Temp. Gain of Every
Cycler
0.0~9.9
5 +Time
Time Gain of Every
Cycler（mm:ss）
0:00~9:59
Cycle1 Section Numbers 1~5
×00
Cycler Numbers from
beginning to the end
1~99
From 00
The start segment of
the section
X（and existed segment
no.）
6
to 00
The end segment of
the section.
≤ X+15
Cycle1：×00 From 00 to 00
7 Grad.
Gradient Temp.
Difference（ ）
0 ~30
8 Date Date(YY-MM-DD)
00（~99）-01（~12）-
01（~31）
year-month-date
9 Time Time(HH:MM:SS) 00:00:00~23:59:59 hour：minute：second
10 Default File The default file name
Max. length is 11
characters.
11 Default User
The default user
name Max. length is 11
characters.
Block
Under this mode (once
reaching target temperature
namely entering into the
thermostable state), the time
for
reagent’s temperature
under target temperature is
less than setting time (see Fig.
1).
12 Control Mode Control Mode
Tube
Under this mode (once
entering into the thermostable
state after reaching target
temperature and decreasing
about
3°C), reagent’s
temperature can be close to
target temperature very fast
(see Fig. 2).
13 Sample Volume Sample Volume（ul） 10~200
State of Hotlid: OFF OFF
14 Hotlid Temp
State of Hotlid:
Open（ ）
30~99
15 Block Temp
State of Block Temp
during the heating of
Hotlid（ºC）
0~99
16 Key Beep
Key Sound (ON or
OFF)
OFF/ON Humming
17 Run End Beep
Run End Sound (ON
or OFF)
OFF/ON Humming continuously