Landoll 4630-36 Folding Seeder Operators Manual v.F-640-0513 05/2013 - Manual (Page 24)

4-6 F-640-0513 Edition
OPERATION AND MAINTENANCE
Figure 4-4: Hitch Clevis Height
Leveling the Hitch Clevis
1. The hitch clevis height should be adjusted to match
the drawbar height of the tractor. This will allow the
telescoping hitch to operate through its most efficient
range and level throughout the field (See
Figure 4-4.)
2. On a level surface, measure from the ground to the
top side of the tractor drawbar. For drawbar heights
18” or lower use the lower hitch clevis holes. For
drawbars 20” tall use the middle hitch clevis holes,
and for 22” or greater use the top mounting holes.
5530-hitchclevis
HITCH CLEVIS HEIGHT
ADJUSTMENT