Landoll M-88 TRANSPORT LINK - Manual (Page 2)

ASSEMBLY INSTRUCTIONS FOR 4J637 TRANSPORT
LINK KIT FOR BRILLION M-88 PULVI-MULCHER
1
2
3
4
5
6
7
8
9
9D936
4J640
6C703
4D198
1C133
1C205
3C236
1C277
8C527
Strap
Transport Bracket Assembly
Cylinder Pin Assembly with 4C856 Hairpin Cotter
Clevis Pin (3/4 Dia. X 2-3/4 Lg.)
Flat Washer (3/4” S.A.E. Flat)
Cotter Pin (5/32 X 1-1/2 Lg.)
Capscrew (3/8 - 16 NC X 3” Lg.)
Nut (3/8 - 16 NC Hex)
Capscrew with 1C390 Nut and 1C109 Lockwasher
2
1
1
1
2
1
1
2
2
YOUR TRANSPORT LINK KIT CONTAINS THE FOLLOWING PARTS:
Attach the transport bracket assembly to the top center holes of the
rear channel frame with the present hardware and to the center
truss frame with the #9 ½ inch capscrews as shown. Torque 1/2
inch capscrews to 120 ft-lbs. Fasten the straps to the lift arm with
the #3 cylinder pin assembly, and to the transport bracket assembly
with a #4 clevis pin, a #5 flat washer on each side and a #6 cotter
pin.
0613 4J638
Sym. Part No. Description Qty.
3
7,8
5
6
2
5
4
9