Landoll LSS6 Landscape Grass Seeder - Manual (Page 20)

2-10 7K458
OPERATION
Adjustment of Wheel Track
Remover
The depth of the wheel track removers can be adjusted
as shown. See Figure 2-10. Loosen the 1/2” capscrews,
lockwashers and nuts that secure the clamps to the coil
tine supports. Adjust the supports up or down to the
desired depth and then retighten the nuts on the screws.
Do this for each pipe and tine assembly.
Figure 2-10: Wheel Track Remover
CAPSCREW
1/2-13 NC x 1 1/2”
LOCKWASHER, 1/2”