Landoll 112 Alfalfa Seeder Medium Capacity Sure Stand - Manual (Page 12)

2-2 9K713
ASSEMBLY INSTRUCTIONS
3. Remove 5/8” shipping bolt from right side of frame
which locks rear roller down. Bolt is located in a
position similar to the parking pin.
4. Install the LED Warning Lamps and Harnesses. See
Figures 2-7, 2-8 and 2-10.

CAUTION
Figure 2-2: Shipping Bolt and Parking Pin
Do not disengage pin unless seeder is fully
attached to a tractor. Seeder may be rear-heavy
and tip backward on frame
Parking Pin
Shipping Bolt