Landoll WFPC22-36 Wing Float Pulverizer - Manual (Page 29)

ASSEMBLY
2-15
Wing Roller Axle Installation
Attach a Roller Axle Assembly into each Wing Frame.
Space between roller wheels can be minimized by
loosening and sliding the Bearing Hanger, then
re-tightening the hardware.
Tighten 3/4-10 and 5/8-11 hardware to specification per
torque chart. See Page 4-1.
NOTES
Roller Axle Assembly clamped end must be on the outer
extremity of the Wing.
Figure 2-14: Install Wing Roller into Wing Frame
Trunnion Washer
Trunnion Mount
Bearing Hanger Clamp
5/8” Flange Nut
Bolt, 3/4-10 x 2-1/4”
3/4” Lockwasher
Bearing Hanger
Bolt, 5/8-11 x 7”