Landoll ICON 800 Series Earthmover - Manual (Page 33)

Hub & Axle Assembly
Axle and Hub assembly shown with brake package.
Brake assembly mounted on tire/rim
Rear frame of the 821 shows the horizontal mounting
blocks for the axle assembly. 1 x 9” bolts are used to
mount the assembly to the frame.
NOTE: The axle clamp mounting bolts are placed
horizontally to aid in installation/removal of assy.
A thin walled socket with a max of 2 1/16”OD and
an extension of at least 24” is needed to perform this
operation properly.
The assembled rear, with 23.5 tires on the outside and
20.5’s of the inside. Along with the offset of the axles
add a larger footprint for greater floatation.
Caliper # 4001276