Landoll ICON AG-10 - Manual (Page 2)

AG – 10 Specifications
Capacity (struck)…………………………………..8.4 yd
(heaped)………………………………….10 yd
Weight (empty)…………………………………...17,512
Tongue Weight (empty)…………………………..1,500
Width of Cut………………………………………..8 ft
Overall Width………………………………………9 ft. 1 in.
Ground Clearance At Bit……………………………18 in.
Negative Cut…………………………………………12 in.
Overall Length……………………………………...348 in.
Gate Opening……………………………………….46 in.
Cylinders (lift)……………………………………..6 x 22
(gate)……………………………………3.5 x 20
(push off)……………………………….4.5 x 32
Tires (front)…………………………………..15 x 19.5
(rear)…………………………………..20.5 x 25
Inflation 15 x 19.5 ……………………………... 60 psi
20.5 x 25………………………………. 58 psi
Rims (front)………………………………….19.5 x 12.25
(rear)……………………………………17 x 25 3 pc
Cutting Edges
(center)………………………………..7/8 x 16 x 48”
(outside)………………………………7/8 x 13 x 23.75”
Spindle Rating
(front)…………………………………12,000 lb
(rear)………………………………….20,000 lb
Hydraulic Hoses…………………………………….3000 psi
Hydraulics are controlled by a 2 valve system, using a steel sequencing block and requiring
2 tractor remotes.