Landoll ICON 1205 - Manual (Page 14)

Shown are the (5) hydraulic hoses.
Note the Tee in the tilt circuit.
The hose stand is ICO0004
It is attached with (2) 1/2 x 1 1/2” bolts
and nyloc nuts, flat washers.
The hoses are clamped with
(1) 1/2 x 2 1/2” bolt, nyloc nut, and flat
washer.
The clam cylinder is 4000026 (4 x 16)
Cylinder pins are GRA1600
Front Cylinder Mount
SCR2026
Hydraulic Ends are 5000981 (6)