Leica Biosystems M80 - Manual (Page 51)

Leica M-series User Manual 51
The intensity of the illuminator can be
adjusted in 10 increments.
The Leica LED3000 NVI™ can also be
controlled via the Leica Application Suite
(LAS) or the Leica SmartTouch.
Using the Leica LED5000 CXI results in an
increased magnification level of 1.5×.
Depending on the components used,
different intensities of vignetting may
occur at low magnification. Vignetting is normal
and not a malfunction.
Use
• The light of the Leica LED5000 CXI can
be very bright. Therefore, always switch
on the illuminator before you look through the
eyepieces!
1. Switch on the illuminator by briefly press-
ing the (ON/OFF) button.
The green LED on the upper left corner now
lights up.
2. Adjust the brightness by briefly pressing
the or buttons.
3. Switch off the illuminator by briefly press-
ing the button.
Leica LED5000 CXI (Coax Illumination)