Britax LATCHANCHOR - Manual (Page 21)

Forward Facing Lap-Shoulder
Belt Installation
Figure A illustrates a typical lap-
shoulder seat belt system.
1 Place the child restraint forward
facing on the vehicle seat.
2 If stabilizing bar is extended
press blue release button, located
adjacent to the right side rear fac-
ing lock-off, to release and store
bar (fig. B).
3 Pass the seat belt through both
side slots, then fasten the seat belt
and verify that it is not twisted
(fig. C).
4 Before continuing, make sure
that the lap portion of the seat belt
passes under BOTH lap belt posi-
tioning guides (fig. D).
Installation: Forward Facing
Shoulder
Lap
D
A
C
B
20
FAGalaxy_page proof 2/9/02 11:17 AM Page 20