Britax LATCHANCHOR - Manual (Page 35)

Adjusting Harness Height
Harness Height Adjustment
1 Loosen the harness by lifting the
adjuster lever located in the front
of the seat while pulling the shoul-
der straps forward as far as possible
(fig. A).
2 From the rear of the child
restraint, pull the yoke over the top
of the harness guard, unhook the
shoulder harness from the yoke
(fig. B).
3 Pull straps through the shell and
cover, to the front of the seat.
4 Thread the harness straps
through the appropriate harness
height slots (fig. C).
5 Reattach harness straps to the
yoke (fig. B).
6 Pull harness adjuster strap to
tighten the harness.
7 Verify that all straps are threaded
at the same height and are not
twisted.
A
Yoke
Harness
guard
B
C
34
FAGalaxy_page proof 2/9/02 11:17 AM Page 34