Britax LATCHANCHOR - Manual (Page 24)

Installation: Forward Facing
5 Press child restraint into vehicle seat,
while removing slack from the lap portion
of the seat belt (fig. E).
6 Verify that the seat belt is tight and the
child restraint is secure.
7 See Checking Buckle Position below.
Removal
To remove the child restraint, unfasten the
seat belt and reverse the above directions.
WARNING: The position of the vehicle seat
belt buckle can affect the stability of your
child restraint. In an accident an improper-
ly positioned buckle could come loose and
your child would be unprotected.
When the vehicle belt is tightened, if the
buckle lies near the position marked as
wrong, ( ) then try fitting your child restraint
in another seating position in your vehicle.
If it is not possible to achieve the correct
position ( ) for the buckle then another
seating position MUST be used.
IMPORTANT: Check that your child
restraint is secure before each trip.
E
Checking Buckle Position
23
FAGalaxy_page proof 2/9/02 11:17 AM Page 23