Lenze E82ZWBRB - Manual (Page 31)

Electrical installation
Wiring in the 8200 motec
4
EDK82ZWBRB DE/EN/FR 2.0
31
l
H1_E_INST−82zwbrx_verdraht_motec_BL_EN
0 Connection variant 1:
Z1 Standard I/O function module
The internal voltage source of the function module supplies the digital output.
Activation of the brake switch via the digital output of the function module.
1 Connection variant 2:
Z1 Application I/O function module
The internal voltage source of the function module supplies the digital output.
Activation of the brake switch via the digital output of the function module.
2 Connection variant 3 (only with 8200 motec, variant V152 or V153):
Z1 Function module
The internal voltage source of the function module supplies the digital output of the
motec.
Activation of the brake switch via the digital output of the motec.
Note:
Instead of using the internal voltage source of the function module, you can also supply
the digital output of the motec via an external 24 V DC voltage source.