Lenze EY System cables and system connectors - Manual (Page 70)

How to select your system cable
Feedback cables
Feedback type
4
l
70 EDSYPFLD EN 8.0
4.3.2 Feedback type
The table gives more detailed information about the feedback, the structure and
cross−section of the feedback cable, and the connectionon the controller.
RSx 3 (2 x 0.14 + (3 x 0.14) X7 X7 X7
[mm ] 2 9300 9400 ECS 9300vector 8200vector 8400
1 2
3 4 5
0
 ‚ ƒ
hb_tab_07
0 Feedback with plug
1 Feedback cable
2 Controller
3 Feedback types
4 Structure and cross−section of the feedback cable
5 Interface on the controller
ƒ The
 column describes which feedback type is to be connected to the controller.
– The symbol may represent a feedback with a plug or a terminal box.
ƒ The ‚ column gives more detailed information about the feedback cable:
– Here, the symbol stands for the extension/connection cables. The exact product
key of these feedback cables can be seen from the following two tables.
– The feedback cables are shielded multi−core cables with the parentheses
representing the shield.
ƒ The
ƒ column contains the controller types.
– The feedback cable is plugged on the specified interfaces of the different
controllers.