Lenze EMF2192IB - Manual (Page 35)

Technical data
General data
4
EDK2192IB DE / EN / FR 2.0
35
l
H1_Daten−LESE_Dokus_8200_9300_ECS
4 Technical data
General data
Field Values
Order designation EMF2192IB
Communication profile EtherCAT
Supported device profile
and mailbox protocol CANopen over EtherCAT (CoE)
Communication medium S/FTP (Screened Foiled Twisted Pair, ISO/IEC 11801 and EN 50173),
CAT 5e
Interface RJ45, standard Ethernet (in accordance with IEEE 802.3), 100Base−TX (Fast
Ethernet)
Network topology Line, switch
Node type EtherCAT slave
Number of nodes Max. 65535 (in the entire network)
Cable length between
two EtherCAT nodes Max. 100 m (typical)
Cycle times 1 ms or an integer multiple of 1 ms,
Max. 15 ms if "Distributed clocks" (DC) are used
Node type EtherCAT slave
Vendor ID 0x3B
Product ID Depending on the standard device used
Revision ID Depending on the major software version of the EtherCAT module
Baud rate 100 Mbps
Voltage supply External supply via separate power supply unit
l Terminal "+": U = 24 V DC (20.4 V − 0 % ... 28.8 V + 0 %)
I = 140 mA
l Terminal "−": Reference potential for external voltage supply
Conformities, approvals CE
,
Documentation for Lenze series of devices 8200 vector, 9300 and ECS
Here you can find the ambient conditions and the electromagnetic
compatibility (EMC) specifications applying to the communication module.