Lenze E82ZBS020 - Manual (Page 10)

Switch unit - Installation
EDK82ZBX020 3.0
l
- 4 -
Install and connect switch unit
1. Break free opening M20 at the carrier housing or remove cover.
2. Bolt switch unit into the opening from outside.
- Enclosure IP55 is maintained thanks to the preassembled seal.
3. Fix sticker to the carrier housing.
4. Connect switch unit to the function module.
5. For function modules with terminals X3/7 and X3/39:
- Connect X3/7 and X3/39 using a jumper.
6. Parameterize controller, if necessary.
Show/Hide Bookmarks