Lenze E82ZBS020 - Manual (Page 11)

Switch unit - Installation
EDK82ZBX020 3.0
l
- 5 -
Application examples 8200 motec:
Reversal of direction of rotation (CCW - Stop - CW) with Standard I/O or
Application I/O
Ÿ Deceleration after STOP along the quick stop ramp (C0105).
Ÿ Deceleration and acceleration after a reversal of the direction of rotation along ramps C0013 and
C0012.
Example for terminal configuration C0007 = -16-
28 E3 E2 E 39 20 X3
Terminal assignment
28 E3 E2 E4 39 20 7 X3
‚
X3/20 Brown wire
DC supply +20 V
Jumper to X3/28 (CINH)
CW CCW 0

X3/E3 White wire = CW rotation
(CW/QSP on X3/E3)
CW CCW 0

E82ZBSP001
X3/E4 Green wire = CCW rotation
(CCW/QSP on X3/E4)
 Switch unit
‚ Jumper only for Standard I/O
CW CW rotation
Parameterisation C0007
CW CW rotation
0 Stop
CCW CCW rotation
C0007 = -16-
You can parameterise the terminal configuration using C0410 as desired
(see Operating Instructions)
Start/Stop (CINH) with any function module
STOP START
START STOP
28 39 20 7 X3

0
0
Terminal assignment
STOP START
START STOP
28 39 20 7 X3

0
0
X3/20 Brown wire
DC supply +20 V
STOP START
START STOP
28 39 20 7 X3

0
0
X3/28 White wire = CINH
STOP START
START STOP
28 39 20 7 X3

0
0
E82ZBSP002
Green wire = not used
 Switch unit
STOP Controller inhibited
0 Controller inhibited
START Controller enabled
Green wire = not used
Appropriate insulation!
• Instead of using X3/28 digital input, (X3/E1 ... X3/E6) can also be
connected and thus different digital functions (e.g. fixed frequency
JOG1 at E1) can be activated.
• For instance, fixed frequency JOG1 at E1.
Show/Hide Bookmarks