Lenze E71ZJ001 - Manual (Page 3)

Support E71ZJ001
Mounting set FIF for starttec
EDK71ZJ001 2.0
l
Lenze Drive Systems GmbH, Postfach 10 13 52, D-31763 Hameln
( (+49) 5154 82-0, Fax Service: (+49) 5154 82-1112
These Instructions
Ÿ describe the mechanical installation of the support E71ZJ001 in the starttec
Ÿ are only valid together with the Mounting Instructions of
- the corresponding starttec and
- the corresponding function module
Description
The support E71ZJ001 is suitable for incorporating the following function modules (coated version):
Ÿ E82ZAFC 001 (CAN)
Ÿ E82ZAFD 001 (DeviceNet/CANopen)
Ÿ E82ZAFI 001 (INTERBUS)
Ÿ E82ZAFL 001 (LECOM-B)
Ÿ E82ZAFP 001 (PROFIBUS-DP)
Range of application
Applicable in starttec from the nameplate data: E71MM402_xAxxx VA10
Items supplied
1 mounting set consisting of
Ÿ 1 PE conductor
Ÿ 1 support
completely mounted with baseplate, board, ribbon cable and binding screws
Terminal 28 (controller inhibit) of the function module is not active.
Controller inhibit is switched via terminal 28 of the starttec.
STOP
EDK71ZJ001
00477234
11/03
Show/Hide Bookmarks