Lenze E71ZJ001 - Manual (Page 4)

Mechanical installation
EDK71ZJ001 2.0
l
- 2 -
1. Screw the PE conductor to PE.
1.2 Nm
10.6 lb-in
EZJ001
2. Position the free end of the PE conductor between support and starttec housing 0.
3. Attach the support with the screws 1 to the starttec housing
4. Plug on the ribbon cable 2
5. Plug on the FIF module (according to the Mounting Instructions which are enclosed to the FIF
module)
1 Nm
8.8 lb-in
0
EZJ003
EZJ002
Show/Hide Bookmarks