Lenze EPZ-10203 - Manual (Page 16)

Electrical installation
Assignment of the terminals
EDK10203EZ3 DE/EN/FR 4.1 16
l
H1_E_INST−Ink−TTL_en
Terminal Signal type Function Technical data Remarks
X1/I15 Digital
inputs LOW (0 V ... +4 V)
HIGH (+13 V ... +30 V)
Input current: max. 8
mA at 24 V
X1/I16
X1/O5
...
X1/O8 Digital
outputs LOW (0 V ... +4 V)
HIGH (+13 V ... +30 V)
Load capacity: max.
1 A
X2/A
^ − Reference potential for
analog signals l Use shielded
cables
l Connect the
screen at both
ends X2/AI4 Analog
inputs Input voltage:
−10 V ... +10 V
Resolution:
10 bit + sign
X2/AI5
X2/+O24 − DC voltage supply 18 VDC ... 30 VDC Connected via
emergency off at the
Drive PLC
X2/
^
24 − GND, reference potential
for digital outputs
X4/I9
...
X4/I14 Digital
inputs LOW (0 V ... +4 V)
HIGH (+13 V ... +30 V)
Input current: max. 8
mA at 24 V
(
Stop!
ƒ Ensure a sufficient dimensioning of the DC voltage supply, if the loads are
connected to the digital outputs.
ƒ The extension board must exclusively be supplied separately.The internal
supply via the Drive PLC is not permissible.