Lenze E82ZZ113 - Manual (Page 21)

Technical data
General data and operating conditions
3
EDK82ZZ113 DE/EN/FR 2.1
21

H1_Daten-TD_Montagebed_E82ZZ
3 Technical data General data and operating conditions
Standards
Approval UL UL 508C, Component Power Conversion Equipment -
Accessories (file no. E132659) for the US and Canada
Mains data
Mains types
With grounded neutral (TT /TN systems) Operation permitted without restrictions
IT systems 230 V Observe instructions for special measures in the
documentation for the basic device!
400 V Max. mains voltage 400 V!
Observe instructions for special measures in the
documentation for the basic device!
Protection
Type of protection EN 60529 IP 20
Not in the wire range of
the terminals NEMA 250 Protection against contact to
type 1
Insulation resistance EN 61800-5-1 Overvoltage category III
> 2000 m: Overvoltage category II
Leakage current EN 61800-5-1
E82ZZ...B200
E82ZZ...B210
> 3.5 mA Observe regulations and
safety instructions!
E82ZZ...B220 < 3.5 mA
Ambient conditions
Temperature
Storage -25 ... +60 °C
Transport -25 ... +70 °C
Operation -10 ... +55 °C
Current derating from +40 to +55 °C: 2.5 %/°C
Site altitude 0 ... 4000 m amsl
1000 ... 4000 m amsl: Current derating by 5 %/1000 m
Pollution EN 61800-5-1 Pollution degree 2
Vibration resistance EN 50178, IEC 61800-5-1,
Germanischer Lloyd,
general conditions
Acceleration-resistant up to 0.7 g
Mounting conditions
Mounting location In the control cabinet
Position Standard: between mounting plate and basic device
Variant: to the left of the basic device
Mounting position Vertical, connections on top