Lenze DDS Function library TpDrv - Manual (Page 5)

Function library LenzeTpDrv.lib
Preface and general information
1.1 About this Manual
1−1
l
LenzeTpDrv.lib EN 1.2
1 Preface and general information
1.1 About this Manual
This Manual contains information about the function library LenzeTpDrv.lib for the Drive PLC
Developer Studio.
·
The function library LenzeTpDrv.lib includes functions and function blocks for configuring the
touch probe interface and accessing touch probe signals from IEC61131−3 applications.
1.1.1 Conventions used in this Manual
This Manual uses the following conventions to distinguish between different types of information:
Variable names
are written in italics in the explanation:
·
"The signal at nIn_a ..."
Lenze functions/function blocks
can be recognized by their names. They always begin with an "L_":
·
"The FB L_ARIT can ..."
Program listings
are written in "Courier", keywords are printed in bold:
·
"IF (ReturnValue < 0) THEN..."
Instances
For function blocks that have one or more first instances there are tables that describe the
corresponding codes:
Variable name L_ARIT1 L_ARIT2 Setting range Lenze
byFunction C0338 C0600 0 ... 5 1
You can access these codes online with Global Drive Control (GDC) or keypad.
Tip!
You can use the Parameter Manager to assign the same codes to these instances that are assigned
in the 9300 servo inverter (V2.0).