Lenze EZN3A0055H045U - Manual (Page 43)

Mechanical installation
Mounting steps
3
l
43 EDKZN3B045 DE/EN/FR 3.0
Design 2
ƒ EZN3A0055H045
ƒ EZN3A0055H045U
EZN−034b
How to mount the filter:
1. Read the chapter "Mechanical installation" in the documentation of the
basic device. Read up particularly on ...
– Precautionary measures while mounting
– Installation material required
– Compulsory starting torques
– Bore spacings and free spaces
2. If the filter is connected to the controller in push−through technique or
cold−plate technique, remove the bottom part 0 by releasing 6 screws.
3. Mount four fixing brackets 1 to the mains filter.
4. Mount the mains filter in the control cabinet.