Lenze EZN3A0055H045U - Manual (Page 47)

Electrical installation
Mounting steps
4
l
47 EDKZN3B045 DE/EN/FR 3.0
Design 2
ƒ EZN3A0055H045
ƒ EZN3A0055H045U
EZN−075b
How to wire the filter:
1. Deenergise the control cabinet and fuse it against re−energisation.
2. Connect the connection cables "load"
2 to the basic device.
– Observe the mounting instructions for the basic device!
3. Attach the PE conductor to the PE stud 1 with the ring cable lug.
– Observe tightening torque!
4. Connect the mains cables to the screw terminal "line"
0.
– Observe tightening torque!