Lenze EZN3B0055H060N003 - Manual (Page 28)

Mechanical installation
Mounting steps
3
l
28 EDKZN3BT DE/EN/FR 1.0
3.2 Mounting steps
EZN3BT005
How to mount the filter:
1. Read the chapter "Mechanical installation" in the documentation of the basic
device. Read up particularly on ...
– Precautionary measures while mounting
– Installation material required
– Compulsory starting torques
– Bore spacings and free spaces
2. If the filter is connected to the controller in push−through technique or cold−plate
technique, remove the bottom part
0 by releasing 6 screws.
3. Mount four fixing brackets
1 to the mains filter.
4. Mount the mains filter in the control cabinet.