Lenze EZN3B0055H060N003 - Manual (Page 31)

Electrical installation
Mounting steps
4
l
31 EDKZN3BT DE/EN/FR 1.0
4.4 Mounting steps
EZN3BT004
How to wire the filter:
1. Connect the connection cables "load"
2 to the basic device.
– Observe the mounting instructions for the basic device!
2. Attach the PE conductor to the PE stud 1 with the ring cable lug.
– Observe tightening torque!
3. Connect the mains cables to the screw terminal "line"
0.
– Observe tightening torque!