Lenze E82ZMBR1 - Manual (Page 10)

Commissioning
qaMM
bahUOwj_oN 3.2
l
- 5 -
Before commissioning
y configure the relay output for brake control
- Signal “Value below Q
min
threshold ” must be assigned to the relay output by
setting C0008 = 7
y set the frequency threshold Q
min
under C0017
- The brake is activated when the setpoint falls below Q
min
- The brake is released when the setpoint exceeds Q
min
y For more detailed information on commissioning, please see the Mounting
Instructions for the motec or the Mounting Instructions for the function module used.
f[Hz]
f
max
(C0011)
Q
min
(C0017)
t
STOP STOP
82ZMBR1003