Lenze g500-H helical gearbox - Manual (Page 12)

Mechanical installation
Important notes
4
EN
12 Lenze ¯ MA 12.0012 ¯ 1.0
4 Mechanical installation 4.1 Important notes
¯ Use load carrying equipment for transport!
¯ Before the transport
– check that all components are safely mounted,
– fasten all transport aids (eye bolts or support plates).
}
Danger!
Danger due to toppling or falling loads!
¯ The payload of the hoists and load handling devices must at least
correspond to the weight of the load.
¯ The load must be secured in such a way that it cannot topple or fall
down.
¯ Do not stay under a pending load!
4.2 Transport equipment for gearbox
}
Danger!
The motors attached to the gearbox are partially equipped with eyebolts.
These are exclusively determined for mounting/dismounting the motor
to the gearbox and must not be used for the complete geared motor!
Please see the position of the transport threads in the following figures. Gearboxes from
size H210 are in series equipped with a transport thread for eye bolts according to DIN
580 in the gearbox cover. In case of smaller drives, the thread in the output shaft can be
used. The eye bolt is not included in the scope of supply!
H45−H140 H210−H450
1.
2.
Fig. 1 Eye bolt position