Lenze g500-H helical gearbox - Manual (Page 21)

Commissioning and operation
During operation
6
EN
21 Lenze ¯ MA 12.0012 ¯ 1.0
6.3 During operation
During operation, check the drive periodically and take special care of:
¯ changes compared to normal operation, like
– unusual noise, stronger vibrations or increased temperatures,
– leakages,
– loose fixing elements,
– the condition of the electrical cables.
¯ In case of faults:
– shut down the drive,
– check the troubleshooting table.
If the fault cannot be remedied, please contact the Lenze customer service.