Lenze GDC with OPC - Manual (Page 6)

Global Drive Control with OPC
General information
4 GDC mit OPC EN 1.0
Tip!
When accessing a bus server via a network, please bear in mind:
In order to protect a computer from unauthorised access, the default DCOM safety settings do not
allow OPC access.
•
Check the DCOM settings for the bus server concerned and change them, if necessary. For
details, please refer to the “ DriveServer – Getting Started” documentation.
4. Click the button Refresh to update the list of available OPC servers.
Tip!
The program distinguishes between “ normal” OPC servers and OPC bus servers:
•
Configuring OPC servers (Data Access 2.0) is usually a difficult and time-consuming process.
•
OPC bus servers (DRIVECOM) have been optimised for use with GDC/DriveServer and
therefore require only minimum configuration.
We therefore recommend the use of OPC servers that also display bus server features (presetting
OPC options:
æ
Bus server (DRIVECOM) ).
5. Select the corresponding OPC server from the list field Available OPC servers and close the
dialog box OPC by clicking Ok.
6. Close the dialog box Select communication driver by clicking Ok.
Configuration of GDC as an OPC client is now complete.
Show/Hide Bookmarks