Lenze GDC with OPC - Manual (Page 8)

Global Drive Control with OPC
General information
6 GDC mit OPC EN 1.0
4 Using the S7-MPI bus server
In conjunction with the bus server S7-MPI, GDC can also be used to set the parameters for drive
controllers networked via PROFIBUS DP and controlled via a Siemens SIMATIC S7 PLC.
The figure below shows the architecture of such a system:
Global Drive Control
Bus server S7-MPI
Function block
MPI
PROFIBUS DP
Siemens SIMATIC S7
•
The GDC oscilloscope function is the only function that is not available via this
communication path.
Show/Hide Bookmarks