Lenze 8400 - Manual (Page 1457)

Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05
1457
18 Function library
18.2 System blocks | LS_ParReadWrite_1-6
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
18.2.29 LS_ParReadWrite_1-6
The LS_ParReadWrite_1 ... LS_ParReadWrite_6 system blocks are used for reading and writing local
parameters.
• If several system blocks are activated at the same time, the blocks will be processed one at a
time every time the main program is executed.
• The SB supports one-time and cyclic reading/writing in an adjustable time interval.
Inputs
Identifier
Data type
Information/possible settings
bExecute
BOOL
Trip read/write request
FALSETRUE If cycle time (C01091) = "0 ms":
One-time reading/writing of the parameter value which has been
addressed via thewParIndex and wParSubindex inputs.
If cycle time (C01091) > "0 ms":
Cyclic reading/writing of the parameter value which has been
addressed via the wParIndex and wParSubindex inputs.
TRUEFALSE Deactivate cyclic reading/writing again.
bReadWrite
BOOL
Selection: Read or write request
FALSE Read request
TRUE Write request
wParIndex
WORD
Code to be read or written.
• From version 06.00.00 onwards , this selection can be optionally carried out via
C01090.
wParSubindex
WORD
Subcode to be read or written.
• From version 06.00.00 onwards , this selection can be optionally carried out via
C01090.
wInHWord
wInLWord
WORD
Value to be written (DataHigh/DataLow portion)
E([HFXWH E'RQH
E5HDG:ULWH E)DLO
Z2XW+:RUG
Z3DU,QGH[
Z3DU6XELQGH[
Z,Q+:RUG
Z,Q/:RUG Z2XW/:RUG
&
:ULWH 5HDG
/6B3DU5HDG:ULWHB[
& [
& [
1XPHUDWRU
'HQRPLQDWRU
& [
& [
& [ $ULWKPHWLF
PRGH
& [




&\FOHWLPH
6WDWH
3DU,QGH[
3DU6XELQGH[
& [
$ULWKPHWLF
PRGH