Lenze Global Drive Cam Loader - Manual (Page 15)

L
1.1 EN - 05/2005 15
Global Drive Cam Loader
Introduction
Creating/preparing import data
4.2.2 Data format of cam track data
For data import with the Cam Loader, the cam track data must be available as an ASCII file
with the ending *.txt.
[ For each product number, you can define max. three cam tracks with 4 cams each.
[ The cam track data are to be entered as follows:
– Cam type
– Cam reference
– Start/stop value of cam 1
– Start/stop value of cam 2
– Start/stop value of cam 3
– Start/stop value of cam 4
General notes
[ After the cam track data you can add a comment after at least one separator (space or
tab character) and two slashes ("//") (option).
[ Space lines between the entries are allowed.
)
Note!
If a syntax error occurs during the data import the number of the line in which
the syntax error has occurred will be indicated in the optional error message!
The 9300 EK controller (9300 servo cam profiler) does not support cam tracks!