Lenze Global Drive Cam Loader - Manual (Page 31)

L
1.1 EN - 05/2005 31
Global Drive Cam Loader
Operation
Editing settings on the worksheet
Slaves
The following table lines represent the slaves:
[ A double-click on the Name field of a slave 2 opens the Properties dialog box for the
corresponding slave.
[ A double-click on an Import data field 4 opens the Import data dialog box for the cor-
responding slave and the corresponding product.
Assignment of the import data
At the crossing point of a slave and a product the assigned import data are represented by
letters.
[ In the below figure, the edged import data field contains the import data assigned to
"Slave3" and product number 2:
[ Meaning of the letters for the assigned import data:
K = cam profile (motion profiles), N = cam tracks, P = position markers
[ Downloading means:
An existing LCx file is downloaded to the target system. There is no compilation.