Lenze Global Drive Cam Loader - Manual (Page 18)

Global Drive Cam Loader
Introduction
Creating/preparing import data
18 1.1 EN - 05/2005
L
4.2.3 Data format of position markers
For data import with the Cam Loader, the position marker data must be available as an AS-
CII file with the ending *.txt.
[ Each line contains one position (X and Y value).
[ The position data can be entered in any order.
[ After the X and Y position you can add a comment after at least one separator (space
or tab character) and two slashes ("//") (option).
[ Space lines between the position data are allowed.
Example:
)
Note!
If a syntax error occurs during the data import the number of the line in which
the syntax error has occurred will be indicated in the optional error message!
The 9300 EK controller (9300 servo cam profiler) does not support position mark-
ers!
10.0 20.0 // position 1
75.5 66.6 // position 2
63.0 30.0 // position 3
33.3 44.4 // position 4