Loadstar Sensors LoadVUE (LV-400,LV-1000,LV-4000,LV-7000) Load Cell User Manual
Page 14
LoadVUE User Guide • 12
Loadstar Sensors, Inc. •
www.loadstarsensors.com
Repeat the steps above. Select ‘Install from a list or specific location’, click
Next.
On the next screen, select
‘Search removable media’
, click
Next
.
Windows will then install the second part of the driver and display the results.
To verify the COM port number that has been assigned to the sensor, open the Hardware Device
Manager. You can do so by going to the Control Panel in Windows and double-clicking on
System
.
On the System dialog box click on the Hardware tab and click on the
Device Manager
button.
When your iLoad Digital USB sensors is connected and correctly installed, you should see a COM
port assigned to it as shown highlighted in the following screen shot (next page).